Browsing by Author "Odebiyi, J. B."

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • Thumbnail Image
    Item
    Investigation of pulping potentials of jatropha curcas
    (2013-10) Ogunjobi, K. M.; Adetogun, A. C.; Soetan, D. O.; Omole, A. O.; Olorunfemi, O.; Odebiyi, J. B.
    The study investigated the pulping potentials of Jathropha curcas, Samples of sawdust, shaving and splinters were taken at three sampling heights (20%, 50% and 90%) and macerated using glacial acetic acid (CH3COOH) and hydrogen peroxide (H2O2) in ratio 1:1. Result of fibre characteristics showed that mean fibre length ranged from 0.216mm at top 0.243mm at middle and 0.244mm at the base. Mean fibre diameter of sawdust (0.01053mm) was highest followed by 0.01028mm for splint and shaving had 0.01002mm. Highest lumen width was recorded at top. Both sampling height and within sample exhibited. Runkel ratio of less than 1 while Flexibility coefficient compared favourably with other species. This study showed that Jatropha stem can be used as an alternative in pulp and paper industry taking advantage of its appreciable short fibre length and Runkel ratio of less than 1.
  • Thumbnail Image
    Item
    Relationship between mechanical properties of vitex doniana, a lesser known species and implications for utilization
    (2013) Ogunjobi, K. M.; Adetogun, A. C.; Omole, A. O.; Owoeye, S. O.; Odebiyi, J. B.
    Relationship between the mechanical properties of Vitex doniana, a lesser known wood species was investigated towards determining its potentials for utilization. Four trees obtained from the free area of Olokemeji Forest Reserve, Ogun State, Nigeria were sampled at butt (50cm above the ground) and at 10%, 30%, 50%, 70% and 90% of merchantable height (MH) The samples were also partitioned into corewood, middlewood and outerwood. Impact Bending (IMB), Modulus of Rupture (MOR), Modulus of Elasticity (MOE) and Maximum Compressive Strength Parallel to Grain (MCS//) were determined. Relationship between the mechanical properties was determined using regression equation. Results showed that Mean IMB, MOR, MOE and MCSS// were 0.69m, 85.4 N/mm2, 6380N/mm2 and 40.8N/mm2 respectively. The best relationship existed between IMB and MCS// (R2 = 0.75) followed by between MOR and MOE (R2 =0.71) while the least relationship (R2 = 0.43) existed between MOR and MCS//.