AGRICULTURAL & ENVIRONMENTAL ENGINEERING
Permanent URI for this communityhttps://repository.ui.edu.ng/handle/123456789/567
Browse
2 results
Search Results
Item Combustion characteristics of briquettes produced from three binders and torrefied gmelina arborea (robx.) sawdust(2023) Bello R.S.; Olorunnisola A.O.; Omoniyi T.E.; Onilude M.A.Considering the energy potential of briquettes, there are several undesired harmful qualities such as intense yellow flame and smoke. Torrefaction was deemed a suitable technological solution, therefore, the study investigated the combustion properties of briquettes made from Gmelina arborea sawdust and three binders used print paper (UPP), newsprint (Np) and clay (CL). Materials and Methods: Experiments were conducted using a hydraulic press and a biomass stove. The 3 torrefied feedstock samples (TS 30, TS 45 and TS 60 min) were mixed with binders at 10, 20, 30, 40 and 50% w/w at 1.67 kPa applied pressure and 5 min residence period to produce briquettes. The results were statistically analyzed at significance level using ANOVA. Results: Briquette densities decreased with an increase in torrefaction time with strong positive correlations between densities of the same binder type, concentration and torrefaction time. An increase in binder concentration enhanced the combustion characteristics of UPP and Np briquettes positively, with significant negative effects on CL briquettes. Torrefied used printing paper briquette burns with non-luminous flame and reduced smokiness as binder concentration increases, while newsprints briquette produced excessive smokes. Briquettes produced from used printing papers at 45 min torrefaction had better performances in terms of energy values, product flammability and reduced smokiness. Clay-bonded briquettes had delayed ignition 7-10 min and failed to burn with flame, rather than by char combustion. Conclusion: Torrefaction time, binder type and concentration had significant positive effects on the combustion characteristics. Clay had poor effects on combustion characteristics.Item Development of a multiple-piston hydraulic briquetting press hbp and characterization of newsprint briquettes produced(2023) Bello R.S; Olorunnisola A.O.; Omoniyi T.E.; Onilude M.A.Technical complexity, power source, cost, and product value are some challenging considerations in briquetting. Most of the available briquetting options are not sustainable due to these challenges, therefore, improved intermediate technology options requiring low energy consumption, high-energy product and acceptable combustion characteristics to meet these challenges are justified by developing a multiple-piston hydraulic briquetting press (HBP) and characterizing the briquettes produced from Gmelina arborea sawdust and newsprint binder. Materials and Methods: Sorted Gmelina arborea sawdust was mixed with pulped newsprint fibers in 5 ratios 10, 20, 30, 40 and 50%, respectively, to produce briquettes. The briquettes were characterized using American Society for Testing and Materials (ASTM), British Standard (BS), and International Standards Organization (ISO) test procedures to determine briquette characteristics. Results: The machine output capacity was 96 briquettes/hour, with low production cost (NGN40, 000.00). The briquettes produced are structurally stable with dimensions: 15.00 mm internal hole, 80.00 mm external diameter, and 60.00 mm height. Low binder briquettes (90:10% wt/wt) are fragile and brittle, while higher binder briquettes are strong and durable. Binder concentration positively improves the combustion characteristics, while the time spent cooking 1 kg of yam is not significantly different for rice. The briquettes thermal efficiency in stove was significantly affected by binder concentration and stove characteristics. Conclusion: The outcomes of this study including high machine output capacity, briquettes’ stability, luminous flame and reduced smokiness showed positive quality contributions to densification study and hence, suitability for domestic heating.