FACULTY OF TECHNOLOGY
Permanent URI for this communityhttps://repository.ui.edu.ng/handle/123456789/269
Browse
2 results
Search Results
Item Properties of latex polymer modified mortars reinforced with waste bamboo fibers from construction waste(2018) Akinyemi B.A.; Omoniyi T.EThis study evaluated the properties of latex modified cement mortars from ordinary paints which were reinforced with treated bamboo fibers from construction waste. Fiber variations of 0, 0.5, 1 and 1.5% at 10% of the weight of cement were utilized. Mechanical properties were determined according to standards; similarly, scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the micro structural and elemental properties of the samples. The experimental results revealed that the addition of 1.5% bamboo fibers and 10% latex solution produced excellent mechanical properties. This was as a result of improved fiber adhesion to the matrix through pre-treatment, coupled with the contributed high strength from the latex paint modified mortars. The micro graph showed that latex precipitated in the voids and on the surface of the bamboo fibers as well as gels of calcium silicate hydrates which contributed to the observed improvement in strength of the tested samples.Item A management approach to construction and demolition wastes in ibadan metropolis(2014) Omoniyi T.E.; Akinyemi B.A.; Nwosu S.C.The construction and demolition waste impacts negatively on the natural economy and the environment. This paper examines some engineering and management approaches such as waste segregation, reduction concept, reuse concept, waste exchange concept and waste rethink concept to construction and demolition wastes in Ibadan Metropolis. Two sites each were visited for construction and demolition activities to observe and quantity their waste characteristics. Construction site A is of a 40.375m length by 39.225m width storey building at decking slap stage with a total waste components of 2500Kg having 32% of it as wood(planks) and 36% of it as bamboo. Construction site B has 42.1m length by 24.385m width storey building at lintel stage has total waste components of 625.5Kg with 48% of it being wood(planks) and 0.90% of it being cement bags(sacks). Demolition site C has a total of 10850Kg with 92.2% of it as concrete/brick wastes and 0.50% of it constitutes electrical and paper materials and demolition site D of total waste components of 8630Kg has 93% of it as concrete/brick materials and 2.3% as metal wastes. These figures show that an enormous amount of wastes are generated from construction and demolition activities and if not properly managed, it could negatively impact our environment. Therefore, it is ideal that appropriate measures are taken to ensure effective management of these waste hence the various waste components identified in all the sites under consideration can be harnessed and transformed into other uses.